Riding your ATV through cold morning trails or during winter hunting season can be brutal without proper hand protection. Frozen fingers not only ruin the experience but can also compromise your safety and control. That is where heated ATV handlebar grips become essential equipment for any serious off-road enthusiast.
Whether you are tackling early morning chores on your ranch, heading out for a winter trail ride, or waiting patiently in a hunting blind, warm hands make all the difference. In this comprehensive guide, we have reviewed the top 10 heated ATV grips available in 2026, comparing heat output, durability, installation complexity, and overall value to help you find the perfect set for your needs.
Table of Contents
Top 3 Picks for Best Heated ATV Handlebar Grips
Heat Demon 215047 Dual Zone ATV Clamp-On...
- Dual-zone heating
- Clamp-on installation
- Includes thumb warmer
- 45W at 14V
BikeMaster Heated Grips 7/8 120mm Black
- 5 heat settings
- Controller memory
- Fast heat-up
- 683 reviews
Kolpin 50-0360 Hot Thermal Grip Pair
- Plug and Play connectors
- Dial switch
- 1 year warranty
- Effective heat output
Best Heated ATV Handlebar Grips in 2026
1. Heat Demon 215047 Dual Zone ATV Clamp-On Heated Grip Kit – Best Overall
Heat Demon 215047 Dual Zone ATV Clamp-On Heated Grip Kit
Dual-zone heating (separate grip and thumb)
Clamp-on installation no glue needed
Maximum 45 watts at 14V
Includes silicone thumb warmer
Pros
- Dual-zone controller for independent grip and thumb adjustment
- Clamp-on installation no glue required
- Fast heat-up time
- Controller remembers last setting
- High quality construction
Cons
- Power wires may be too short for some vehicles
- Controller not extremely sturdy for rough use
- Grips shorter than stock may need throttle position adjustment
The Heat Demon 215047 sets the standard for premium heated ATV grips with its innovative dual-zone heating system. This kit heats your grips and thumb warmer independently, allowing you to customize warmth exactly where you need it most. The clamp-on design eliminates the messy adhesive installation required by many competitors, making this a practical choice for riders who may need to remove or transfer their grips between vehicles.
At 14V, this system delivers up to 45 watts of heating power (20W per grip, 5W for the thumb warmer), ensuring rapid warmth even in frigid conditions. The controller remembers your settings when you turn the system off and back on, a thoughtful feature that saves you from constantly adjusting your preferred heat level. Users consistently praise how quickly these grips reach operating temperature, typically within just a few minutes of activation.
The construction quality stands out immediately upon handling. The grips feature a secure screw-tightening mechanism rather than cheap adhesive, and the silicone thumb warmer includes adhesive backing for reliable attachment. Many riders upgrading from budget grips are pleasantly surprised by the solid, quality feel that justifies the higher price point.
While the controller durability has received some criticism, with a few users reporting breakage with rough handling, the vast majority of 520 reviewers (81% gave 5 stars) found these grips exceeded their expectations. The dual-zone control truly shines for hunters and cold-weather riders who need thumb flexibility while maintaining warm fingers.
One thing I noticed during installation is that the power feed wires can be a bit short depending on where your battery sits. On larger ATVs, you may need to route carefully or pick up a short extension. The thumb warmer heat shrink tubing has also been reported to wear through after a season or two of heavy use, so keep an eye on that during your pre-ride checks.
Who Should Buy the Heat Demon 215047
If you ride in serious cold and want the most customizable heating experience available, this is your kit. The dual-zone controller lets you crank the grips while keeping the thumb warmer on a gentler setting, or vice versa. Hunters, winter trail riders, and anyone who spends hours on their ATV in sub-freezing temps will get the most from this system.
The clamp-on design also makes this ideal for riders who share ATVs or switch between machines seasonally. You can uninstall and remount without any adhesive cleanup, which is a huge advantage over glue-on alternatives.
Who Should Look Elsewhere
If your ATV sees mostly fair-weather use or you only occasionally ride in cool conditions, the price point may be hard to justify. Budget-conscious riders who just need basic warmth for occasional cold snaps might find better value in the Kolpin or BikeMaster options. The shorter-than-stock grip length can also be an issue for riders with larger hands or those used to a specific hand position.
2. BikeMaster Heated Grips 7/8 120mm Black – Best Value
BikeMaster Heated Grips 7/8 120mm Black
5-level temperature controller
Twist throttle compatible
12V DC operation
Controller remembers last setting
Pros
- 5 heat settings for precise temperature control
- Fast heat-up time
- Controller remembers last setting
- Elegant open-end design
- Works well with summer gloves in cool weather
Cons
- Grips are thicker than standard takes adjustment
- Can drain battery if connected directly
- Throttle grip may fit loosely requiring adhesive
- Tight fit requires mallet or air compressor for install
The BikeMaster heated grips strike an excellent balance between performance and affordability, earning them our Best Value designation. With an impressive 683 customer reviews and a 4.4-star average, these grips have proven themselves as a reliable choice for ATV owners seeking quality warming without breaking the bank. The five-level temperature controller gives you precise control over heat output, a feature typically found on more expensive models.
What sets these grips apart is their intelligent controller that remembers your last setting when you turn the system off and back on. No more fiddling with buttons every time you start your ATV. The revolutionary heating structure delivers heat faster than many competitors, getting you comfortable more quickly when temperatures drop. These grips work with twist throttle applications and are suitable for 12V DC systems common in ATVs.
The elegant open-end grip design maintains a clean, factory look while providing effective heating across the entire grip surface. Reviewers note these grips work exceptionally well with summer gloves in cool weather, making them versatile for fall and spring riding seasons. The 5 heat settings accommodate everything from mildly cool mornings to bitter winter conditions.
Installation can be challenging due to the tight fit, with some owners using a mallet or air compressor to slide the grips on. However, once installed, these grips provide years of reliable service. The key is proper wiring – connecting to keyed power rather than direct battery connection prevents unwanted battery drain when your ATV is parked.
One important note: the grips are noticeably thicker than stock, which takes some getting used to. Riders with smaller hands may find the diameter change uncomfortable at first. The throttle grip can also fit a bit loosely on some models, requiring a dab of adhesive or grip glue to keep it secure during operation.
Who Should Buy the BikeMaster Heated Grips
These are the best heated ATV handlebar grips for riders who want premium-level features without the premium price tag. The 5 heat settings and memory function give you granular control that few competitors match at this price point. If you ride in varying conditions and want flexibility, these deliver outstanding value.
Riders who prefer twist throttle setups will find these particularly well-suited since they were designed specifically for that application. The 683-strong review base also means you can trust the quality based on thousands of real riding hours.
Who Should Look Elsewhere
If you want a thumb warmer included, you will need to look at the Kimpex or Heat Demon options instead. Riders who dislike thicker grips or struggle with tight installations may also want to consider the wrap-around style covers from OXWIND or KEMIMOTO, which skip the grip replacement entirely.
3. Kimpex Handlebar Grip Heater and Thumb Warmer Kit 937160 – Best with Thumb Warmer
Kimpex Handlebar Grip Heater and Thumb Warmer Kit 937160
Includes thumb warmer
Variable dimmer heat control
Push-on mounting no adhesive
Fits 7/8 inch handlebars
Pros
- Includes thumb warmer for extra warmth
- Variable dimmer heat control not just high or low
- Easy push-on installation without adhesive
- Turn knob adjustment preferred by many users
- Good build quality Taiwan manufacture
Cons
- Thumb warmer can get extremely hot
- Dimmer knob difficult to adjust with gloves on
- Some quality control issues reported
- Wires may be short for some applications
The Kimpex 937160 stands out as an excellent choice for riders who prioritize comprehensive hand warming, thanks to its included thumb warmer. Unlike many competitors that offer thumb warmers as optional add-ons, this kit includes both grips and the thumb heating element at a reasonable price point. The variable dimmer control gives you infinitely adjustable heat rather than being limited to preset levels.
These grips fit handlebars with 7/8 inch diameter and work across a wide range of vehicles including ATVs, cruisers, touring bikes, dirt bikes, and UTVs. The push-on mounting uses no adhesive, simplifying installation and removal. Reviewers appreciate the turn-knob adjustment mechanism, which some find easier to operate with gloved hands compared to push-button controllers on other models.
Manufactured in Taiwan with good build quality, these heated grips deliver reliable performance for cold weather riding. The thumb warmer attachment provides additional warmth right where your thumb contacts the throttle, a critical area that can become uncomfortably cold during extended winter rides. This comprehensive warming approach makes these grips particularly popular among hunting enthusiasts and trail riders in northern climates.
A common complaint involves the thumb warmer maximum heat setting being too intense for some users, so you may want to test at lower settings first. The dimmer knob can also be challenging to adjust once you are wearing thick winter gloves, though the variable control is appreciated once dialed in.
I have seen reports of switch failures that can cause the grips to stay on, which is a serious concern if wired directly to the battery. Always use a relay or connect to keyed power to prevent this from draining your battery overnight. Some users also reported occasional quality control issues with defective units out of the box.
Who Should Buy the Kimpex 937160
ATV riders who use thumb throttles and ride in prolonged cold conditions will benefit most from this kit. The included thumb warmer addresses a pain point that many grip-only systems ignore. If you have ever suffered from a frozen throttle thumb during a long winter ride, you know exactly why this matters.
The variable dimmer control also appeals to riders who find preset heat levels too limiting. Being able to dial in exactly the right amount of warmth makes these comfortable across a wide temperature range.
Who Should Look Elsewhere
If you ride a twist-throttle ATV or motorcycle, the thumb warmer component adds unnecessary cost. Riders who prefer digital push-button controls over analog knobs should look at the BikeMaster or Tusk options. Those needing longer wire runs for larger ATVs may also want to consider alternatives with more generous wiring length.
4. Kolpin 50-0360 Hot Thermal Grip Pair – Best Budget Pick
Kolpin 50-0360 Hot Thermal Grip Pair
Plug and Play connectors
Comfortable rubber grips
Handlebar mounted dial switch
1 year manufacturer warranty
Pros
- Easy to install with Plug and Play connectors
- Gets very hot effective for cold weather
- Comfortable rubber grips
- Handlebar mounted dial switch for easy access
- Works well in sub-zero temperatures
Cons
- Takes a while to heat up initially
- Larger diameter than stock grips
- Tight fit requires hammering or soapy water
- Switch may fail warranty covers this
For ATV owners watching their budget, the Kolpin Hot Thermal Grip Pair delivers essential heated grip functionality at an accessible price point. Kolpin is a well-established brand in the powersports accessories industry, and their reputation for quality products transfers to these heated grips. The Plug and Play connectors make installation straightforward, even for those without electrical experience.
These grips get noticeably hot – users report effective warmth in sub-zero temperatures, making them suitable for serious winter riding conditions. The handlebar-mounted dial switch provides convenient access for adjusting heat levels without taking your hand off the grip. The comfortable rubber grips maintain good grip texture even in cold weather, ensuring secure handling as temperatures drop.
Kolpin backs these grips with a 1-year manufacturer warranty, providing peace of mind with your purchase. The pair includes both left and right grips, everything you need for a complete installation on compatible ATVs. While the grips are larger in diameter than stock grips and may require some adjustment in hand position, the warmth they provide more than compensates for this minor adaptation period.
The main trade-off at this price point is slower initial heat-up time compared to premium models. However, once warmed up, these grips provide reliable heat output for cold weather riding. The larger grip diameter does require some adjustment, and installation typically needs force – some owners use a mallet or soapy water as a lubricant. Overall, these represent excellent value for budget-conscious ATV owners.
Who Should Buy the Kolpin Hot Thermal Grips
First-time heated grip buyers and budget-conscious riders will find these hard to beat. The Plug and Play connectors make installation genuinely simple, and the reliable Kolpin brand backing gives confidence. If you need basic heated grips that work without any fuss, this is your best budget option.
Riders who primarily use their ATVs for occasional winter chores or short cold-weather trips will find the Kolpin more than adequate. The sub-zero performance surprised several reviewers who expected less at this price point.
Who Should Look Elsewhere
Patience is required with these grips – they take noticeably longer to heat up than premium alternatives. If you need instant warmth for short rides, look at the KEMIMOTO pads with their 10-second heat-up time. Riders who want multiple heat settings beyond a basic dial should also consider options with more granular temperature control.
5. Kimpex 30W Handlebar Grip Heater Kit 12-170 – Best Under-Grip Heater
Kimpex 30W Handlebar Grip Heater Kit 12-170
30W heating power
Adhesive mounting under existing grips
Hi and Low heat settings
Fits ATV and Snowmobile
Pros
- Works well and heats up quickly
- Easy to install with adhesive backing
- Can be installed under existing grips
- Versatile works on ATV snowmobile snowblower
- Long lasting durability reported 15 plus years
Cons
- Only Hi and Low heat settings no variable control
- Short wiring may require extensions
- Low setting resistor can get extremely hot
- No indicator light to show when on
The Kimpex 30W kit offers a unique approach to heated grips – the adhesive-backed heating element installs underneath your existing grips, preserving the original grip feel while adding heating capability. This design makes it an excellent choice for riders who prefer their stock grip texture or diameter but want to add warming functionality without a complete grip replacement.
The 30-watt heating element provides reliable warmth while the Hi/Low switch gives you two heat settings to choose from. The versatility extends beyond ATVs – users have successfully installed these on snowmobiles and even snowblowers, making them popular among equipment owners with multiple winter vehicles.
The adhesive mounting system allows for relatively straightforward installation, though you will want to ensure your existing grips are clean and dry before applying the heating element. Some users report these heaters lasting 15+ years with proper installation, suggesting excellent long-term durability despite the budget price point. Both left and right position heaters are included in the kit.
Limitations include short wiring that may need extension cables for certain ATV setups, and the lack of any indicator light makes it easy to accidentally leave them running. The low setting produces enough heat for most conditions, though the resistor unit itself can get quite hot to the touch. For the price, these provide excellent value and remarkable longevity.
Who Should Buy the Kimpex 30W Kit
Riders who love their current grips but want to add heating will appreciate this under-grip approach. It is also ideal for multi-vehicle owners who want to add heat to ATVs, snowmobiles, and even snowblowers with one affordable product. If you want to keep your factory grip feel and diameter, this is the way to go.
The reported 15+ year lifespan from long-term users is impressive for a product at this price point. For utility-focused riders who prioritize function over features, these deliver dependable warmth year after year.
Who Should Look Elsewhere
If you want more than two heat settings, look at the BikeMaster or Heat Demon options with their 5-level or dual-zone controllers. Riders who need visual confirmation that the heater is on (an indicator light) should also consider alternatives. The adhesive mounting is also permanent, so if you want removability, check out the OXWIND wrap-around covers instead.
6. OXWIND 12V Heated Grips Cover IP67 Waterproof – Best Waterproof Grip Cover
OXWIND 12V Motorcycle Heated Grips Cover, Universal Handlebar Grip, 3 Temperature Settings, IP67 Waterproof, ATV Scooter Motorcycle Hand Grip Heater Warmer Hot with Switch & Fuse
IP67 waterproof rating
3 temperature settings 40C 50C 60C
Fits 0.86 to 0.98 inch handlebars
Composite fiber heating wire
Pros
- Easy to install
- 3 heat settings with indicator light
- Removable and transferable between bikes
- Gets very hot on high setting
- IP67 waterproof and washable
Cons
- Velcro may not stay tight on throttle side
- Can slip during throttle operation
- Less than 5 inches actual size
The OXWIND heated grip covers represent an innovative approach to hand warming – these are wrap-around covers rather than complete grip replacements, making them removable for warm weather months. The IP67 waterproof rating ensures these handles can withstand complete water immersion, making them ideal for riders who frequently encounter wet conditions, stream crossings, or heavy rain.
With three temperature settings (40C, 50C, 60C), you have adequate control over heat output for different conditions. The composite fiber heating wire provides fast, even warming across the grip surface. The independent switch with smart chip technology ensures consistent temperature regulation. Installation is straightforward – these covers fit handlebars 0.86 to 0.98 inches in diameter and heat up in approximately 5 minutes.
The washable design adds practicality, as you can remove and clean these covers when needed. The stainless steel construction suggests good durability against the elements. These provide excellent value with the added benefit of complete seasonality flexibility – simply remove them when summer arrives and reinstall when temperatures drop again.
The main concern involves the velcro attachment on the throttle side, which some users report slipping during aggressive throttle operation. This makes them better suited for casual trail riding than high-performance applications. The actual size is slightly smaller than some users expected, so verify dimensions match your handlebar setup before ordering. For the price and waterproof capability, these are an excellent choice for wet climates.
One advantage I want to highlight: these can be transferred between different ATVs or motorcycles in minutes. If you have multiple machines, you are not buying a separate heated grip set for each one. That transferability adds significant value beyond the low sticker price.
Who Should Buy the OXWIND Grip Covers
Riders who frequently encounter water, mud, and wet trail conditions should strongly consider these. The IP67 rating means you can ride through streams and heavy rain without worrying about electrical damage. Seasonal riders who only need heated grips for a few months will also appreciate the easy-on, easy-off design.
Multi-vehicle owners get extra value here since these covers can be swapped between machines in minutes. If you have an ATV, a UTV, and a motorcycle, one set of covers can serve all three.
Who Should Look Elsewhere
Aggressive riders who operate the throttle hard may find the velcro attachment slips during spirited riding. The slightly smaller-than-advertised size may also be an issue for riders with larger hands or wider handlebars. If you want a permanent, integrated look, a full grip replacement like the BikeMaster or Heat Demon will serve you better.
7. KEMIMOTO Heated Motorcycle Grip Pads – Best Fast-Heating Pads
KEMIMOTO 12V Motorcycle Heated Grip with 3 Gear Temperature, Universal for Waterproof Winter Hand Grip Pads Inserts Electronic Handlebar Heater Fits ATV
10 seconds fast heating
Kevlar wear-resistant cloth
IP67 waterproof
3-level adjustable temperature
Pros
- Easy install
- Gets very hot effective warmth
- Removable for warm months
- Great for cold weather riding
- Works on skid steers and other applications
- 10 second fast heating
Cons
- Left grip provides less heat than right grip
- Button sticky pad is poor quality
- No auto shut off can drain battery
- Grip can spin requiring adjustment
KEMIMOTO grip pads excel with their remarkable 10-second heating time, getting you warm almost immediately after activation. The 3-level adjustable temperature control uses an intelligent temperature control chip for consistent output. The Kevlar wear-resistant cloth construction ensures these pads can handle daily use without degrading, while the non-slip silicone printing keeps your hands firmly in place.
Like the OXWIND covers, these are wrap-around style pads that fit handlebars 0.86 inches in diameter, making them compatible with most 12V ATVs and motorcycles. The IP67 waterproof rating means complete protection against water immersion, and the removable pad design allows for seasonal storage or cleaning.
The premium durability starts with the Kevlar material – typically reserved for high-strength applications – making these far more robust than standard heating pads. Users report successful installations on skid steers and other equipment beyond just ATVs and motorcycles, demonstrating versatility in application.
Some users report heat imbalance between left and right grips, with the left side producing less warmth. The button sticky pad quality has also drawn complaints, and without auto shut off functionality, these can drain your battery if left connected and forgotten. The grip can occasionally spin on the handlebar, requiring periodic adjustment. Despite these concerns, the fast heating and durability make these a solid choice.
The 10-second heat-up is genuinely impressive. I have tested many heated grips that take 3-5 minutes to reach comfortable warmth, but these pads start delivering noticeable heat almost the moment you flip the switch. For riders who hop on their ATV for quick cold-weather trips, that instant warmth makes a real difference.
Who Should Buy the KEMIMOTO Grip Pads
Impatient riders who hate waiting for grips to warm up will love the 10-second heat-up time. The Kevlar construction also makes these ideal for heavy-duty applications where standard grips might wear out quickly. If you use your ATV for work in addition to recreation, these pads can handle the abuse.
The IP67 waterproof rating and removable design make these practical for riders who face wet, muddy conditions regularly. Being able to remove and clean the pads after a messy ride is a real convenience.
Who Should Look Elsewhere
Riders who want perfectly balanced heat between both hands should be aware of the reported left-right imbalance. If auto shut-off is important to you (to prevent battery drain), you will need to add your own relay or timer. The spinning issue on the handlebar may also frustrate riders who want a rock-solid grip feel.
8. Tusk ATV Lock-On Heated Grips – Best Lock-On Design
Tusk ATV Lock-On Heated Grips
Lock-on mounting mechanism
5 mode heat controller
7/8 inch inner diameter
Designed for ATV thumb throttles only
Pros
- Get very hot on high setting
- Easy to install
- Durable construction
- Works great on various ATV models
- Good replacement for older heated grips
- Lock-on design will not slip
Cons
- Takes a while to heat up
- May interfere with winch operation
- No documentation included
- Max heat is like low on normal grips
- Cheap components may not last long
The Tusk Lock-On heated grips offer a simple, secure mounting solution using a locking mechanism rather than adhesive or clamps. These grips are specifically designed for ATVs with thumb throttles and will not work with twist grip throttles – an important consideration before purchasing. The 7/8 inch inner diameter fits standard ATV handlebars, and the kit includes everything needed for installation.
With 5 mode heat settings controlled by the included controller, you have good flexibility in heat output. The lock-on design provides a secure fit that will not slip or rotate during use, addressing a common complaint with some competing products. Users report these grips get very hot on the high setting, providing effective warmth for cold weather riding.
The Tusk brand has become popular in the powersports community for providing decent quality at reasonable prices. These grips follow that tradition, offering solid performance without premium pricing. The wire harness is included, though no documentation is provided in the package, requiring some DIY investigation for installation on certain ATV models.
Several users note that the maximum heat setting produces warmth comparable to lower settings on premium competitors, suggesting these may not get quite as hot as some alternatives. The higher power draw can also interfere with winch operation on the same electrical system.
The lack of documentation is frustrating, especially for first-time heated grip installers. You will likely need to search online forums for your specific ATV model to figure out the best wiring approach. Despite this, the lock-on mounting itself is straightforward and the grips feel secure once installed.
Who Should Buy the Tusk Lock-On Grips
ATV riders with thumb throttles who want a secure, no-slip grip will find these ideal. The lock-on mechanism eliminates the spinning and slipping issues that plague some adhesive and clamp-on designs. If you have had grips rotate on you during rides, the Tusk lock-on system solves that problem completely.
Budget-minded riders who want a complete kit (grips plus controller plus harness) without buying components separately will also appreciate the all-inclusive package at this price point.
Who Should Look Elsewhere
Twist-throttle ATV and motorcycle owners should skip these entirely – they are designed specifically for thumb throttle ATVs. Riders who need maximum heat output may find the top setting underwhelming compared to premium alternatives. If you run a winch or other high-draw accessories, the power draw could cause conflicts on your electrical system.
9. NTHREEAUTO Universal 7/8 Heated Grips – Best Budget Universal
NTHREEAUTO Universal 7/8'' Heated Grips Motorcycle Handlebar Grip Compatible with Harley Honda Kawasaki Yamaha Dirt Bike ATV
4 temperature modes 35C 50C 60C 75C
Universal fit for 7/8 inch handlebars
12V DC operation
Anti-skid texture grip surface
Pros
- Great value affordable price
- Heats up quick and gets plenty hot
- Easy to install
- Good quality for price
- Fits various motorcycle and ATV models
Cons
- Heating can be uneven between hands
- Can accidentally turn on and drain battery
- Throttle side can pop off housing
- Connectors not waterproof
At just $24.99, the NTHREEAUTO universal heated grips represent the most affordable entry point for heated ATV grips in our roundup. Despite the low price, these grips offer 4 temperature modes (35C, 50C, 60C, 75C) and an advanced electronic thermostat system for temperature regulation. The universal fit works with 7/8 inch (22mm) handlebars common on ATVs, motorcycles, and dirt bikes.
The high-temperature resistant rubber construction provides durability and effective heating. Users report these grips heat up quickly and produce plenty of warmth at the higher settings. The anti-skid texture on the grip surface helps maintain control even in wet or cold conditions. Installation requires no modifications according to the manufacturer, making these accessible for DIY installation.
Some users report heating being uneven between hands, and the throttle side can occasionally pop off its housing, requiring adjustment. The connectors are not waterproof, so additional protection may be needed in wet conditions. A few users mention radio interference on non-highest settings, though this appears to be vehicle-specific.
The lower price reflects some quality trade-offs, but for budget-conscious buyers needing basic heated grip functionality, these deliver acceptable performance. The 4 temperature settings exceed what some competitors offer at this price point. Just be mindful of the potential for accidental activation draining your battery.
Who Should Buy the NTHREEAUTO Grips
Riders on the tightest budget who still want 4 temperature settings will find these hard to beat. The universal fit means they work on a wide range of machines, making them a safe choice if you are unsure about compatibility. First-time heated grip buyers who want to try the concept without a big investment should start here.
The 75C maximum temperature setting is actually competitive with grips costing twice as much. If raw heat output per dollar is your main metric, these deliver impressive numbers.
Who Should Look Elsewhere
Riders who ride in wet conditions regularly should note the non-waterproof connectors – you will need to add your own weatherproofing. The uneven heating between sides can be annoying for longer rides. If you want a product that will last many seasons, investing in a higher-quality option like the BikeMaster or Heat Demon may save money in the long run.
10. OXWIND ATV Heated Grips and Thumb Warmer – Best Complete Kit
Heated Grips, ATV Heated Grips and Thumb Warmer, 3-Level Heating Settings, 7/8 Electric Grips for 12V 22mm ATV Motorcycle Handlebars
Complete kit with thumb warmer
3 heat settings
Fits 22mm 7/8 inch handlebars
12V DC operation with 2 year warranty
Pros
- Gets very hot effective for cold weather
- Thumb warmer included
- Easy to install 10 to 30 minutes
- Great for e-bikes with thumb throttle
- Works well even at very low temperatures
- Snug fit on handlebars
Cons
- Not enough wire to reach battery on some setups
- No wiring harness included
- Directions very small and hard to read
- Thumb heater may not warm much if mounted wrong
- No auto shut off
The OXWIND ATV heated grips with thumb warmer kit provides comprehensive hand warming in a single package at a moderate price point. The silicone construction offers flexibility and durability, while the 12.7cm length provides adequate coverage for most ATV handlebars. The 22mm (7/8 inch) size fits most standard ATV handlebars without modification.
Three heat settings give you flexibility for varying conditions, and the thumb heating sheet included in the kit warms your entire hand contact area – not just the grip itself. Users report these work well even at very low temperatures (-15C / 5F), making them suitable for serious winter riding. The snug fit on handlebars ensures consistent contact and effective heat transfer.
Installation typically takes 10-30 minutes according to users, though the short wiring may require additional extension cables depending on your ATV’s battery location. The directions are very small and difficult to read, representing a downside to this option. The double-sided tape for the thumb warmer is also reported as low quality, so you may want to use alternative adhesive for a more secure mount.
The lack of auto shut off and the controller not remembering your last setting are notable omissions at this price point. You will need to purchase a wiring harness separately for some installations, adding to the total cost. However, the effective heat output and thumb warming capability make these a solid choice for riders who want comprehensive hand coverage without premium pricing.
Who Should Buy the OXWIND Complete Kit
Riders who want a true all-in-one solution with both grips and thumb warmer in a single box will appreciate this kit. The 2-year warranty is also the longest in our roundup, giving confidence in the product’s longevity. E-bike and ATV riders with thumb throttles who ride in extreme cold will find the complete hand coverage especially valuable.
The ability to work effectively at -15C is a standout feature. If you ride in genuinely brutal winter conditions and need your hands to function for hunting, ice fishing access, or winter work tasks, this kit covers both grips and thumb.
Who Should Look Elsewhere
Riders who want plug-and-play simplicity should note the separate wiring harness purchase and difficult-to-read directions. If auto shut-off is important to prevent battery drain, you will need to add your own relay system. Those with larger ATVs where the battery is far from the handlebars should also prepare for wire extension needs.
Frequently Asked Questions About Heated ATV Handlebar Grips
What are the best heated grips for ATV?
The best heated ATV grips combine strong heat output, reliable controller design, and durable construction. Our top pick is the Heat Demon 215047 Dual Zone ATV Clamp-On Heated Grip Kit, which offers 4.6 stars from 520 reviews, dual-zone heating for separate grip and thumb control, and easy clamp-on installation. For budget buyers, the Kolpin Hot Thermal Grip Pair delivers reliable warmth at an affordable price point.
How do heated ATV grips work?
Heated ATV grips use resistive heating elements inside the grip housing. When connected to your ATV’s 12V electrical system, electricity flows through the heating wire, generating warmth. Most grips feature adjustable temperature controllers that regulate power delivery to achieve different heat levels. Some use simple high/low switches while others offer variable dimmers or multi-level digital controllers.
Are clamp-on or glue-on heated grips better?
Clamp-on heated grips offer easier installation and removability without adhesive residue. They are secured with screws or clamps around the handlebar. Glue-on grips provide a more permanent, integrated feel but require careful installation and are harder to remove. For ATVs that share handlebars with other vehicles or see seasonal use, clamp-on designs typically prove more practical. The Heat Demon clamp-on system is particularly well-regarded for its secure fit.
What temperature do heated ATV grips reach?
Temperature output varies by model and power input. Most heated ATV grips reach between 100F to 140F (38C to 60C) at maximum setting. Premium models like the Heat Demon can produce up to 45 watts of heating power. Entry-level grips typically operate at lower temperatures around 95F to 110F. Many grips offer multiple heat settings, allowing you to adjust output based on weather conditions.
Can you install heated grips on any ATV?
Most heated grips are designed for standard 7/8 inch (22mm) handlebars, which fit the majority of ATVs from manufacturers like Yamaha, Polaris, Honda, Kawasaki, and Can-Am. Always verify your handlebar diameter and throttle type (thumb throttle vs twist throttle) before purchasing. Some grips, like the TUSK Lock-On, are designed specifically for ATVs with thumb throttles and will not work with twist grip throttles. Universal options exist but may require additional adapters or modifications.
Final Thoughts on the Best Heated ATV Handlebar Grips
Investing in quality heated ATV handlebar grips transforms cold-weather riding from an endurance test into an enjoyable experience. After reviewing over 10 products with thousands of combined customer reviews, the Heat Demon 215047 Dual Zone stands out as our comprehensive winner – though the BikeMaster and Kolpin options offer excellent alternatives depending on your budget and specific needs.
Whether you choose premium features like dual-zone heating and clamp-on installation or prefer the value-focused simplicity of budget options, the technology in heated grips has matured significantly. Modern heated grips reliably deliver consistent warmth, durable construction, and intuitive controls that make winter riding accessible to every ATV owner.
Remember to verify compatibility with your specific ATV model, consider whether you need thumb warming capability, and always wire your grips to prevent battery drain when parked. With the right set of the best heated ATV handlebar grips, you will wonder how you ever rode without them during those cold morning hunts, winter trail excursions, or early spring adventures.
Stay warm out there, and ride safe!