8 Best Replacement Snowboard Binding Hardware Kits (June 2026) Expert Reviews

There is nothing worse than getting to the mountain, strapping in, and realizing one of your binding screws is missing or stripped out. I have been there more times than I care to admit. After losing hardware on trips, borrowing screws from friends, and even resorting to hardware store bolts that barely fit, I decided to put together this guide to the best replacement snowboard binding hardware kits available in 2026.

Whether you lost a screw in the parking lot, stripped a head tightening your bindings too aggressively, or just want a backup set in your gear bag, this roundup covers every option worth considering. I spent time comparing kits from Dakine, Burton, XCMAN, and several other brands to find which ones actually hold up on the mountain.

Every kit in this list uses M6 thread size, which is the standard for nearly all modern snowboard bindings and inserts. I will walk you through compatibility, build quality, and real-world performance so you can pick the right hardware kit and get back to riding without second-guessing your setup.

Top 3 Picks for Best Replacement Snowboard Binding Hardware Kits

Best Replacement Snowboard Binding Hardware Kits in 2026

1. Dakine Binding Hardware – Steel, One Size

I have used Dakine binding hardware for three seasons straight, and the first thing I noticed is how solid these screws feel compared to cheaper alternatives. The steel construction is noticeably harder than generic kits I have tried, which means the Phillips head does not cam out or strip when you are cranking them down in cold weather at the mountain.

The kit includes 8 M6 screws at 14mm length and 8 matching countersunk washers. That is exactly what you need for a full mounting job on most binding and board combos. Dakine also applies Loctite directly to the threads from the factory, which is a small detail that makes a real difference. My bindings have not loosened up mid-session since I switched to these.

With 186 reviews and an 81% five-star rating, this is one of the most trusted hardware kits in the snowboard community. Riders consistently mention that these screws outperform the stock hardware that came with their bindings, especially compared to brands like Bent Metal. The flat head design sits flush in the binding baseplate, giving you a clean, rattle-free setup.

The washers are the real standout here. They are countersunk properly and distribute pressure evenly across the binding disc. I have seen cheaper washers deform under load, but these hold their shape season after season. At just over 2 ounces, the whole kit disappears into any pocket of your gear bag.

Who Should Buy This

This kit is ideal if you want a set-and-forget solution from a reputable brand. If you ride frequently and have had problems with screws backing out or stripping, the Dakine hardware solves both issues. It is also a great choice if you run multiple boards and need reliable mounting hardware for each setup.

Riders with Burton, Union, Rome, and most other major binding brands will find these fit perfectly. The 14mm length works with standard 4×4 and 3D mounting patterns without bottoming out or being too short to engage enough threads.

Who Should Look Elsewhere

If you ride a Burton Channel system, you will want the Burton-specific hardware instead since Channel mounts use a different screw and disc design. Also, riders with thicker binding baseplates or riser setups might find 14mm too short and should look for 16mm or 18mm options instead.

Those on a strict budget can find cheaper kits that do the same basic job, though you will likely sacrifice the pre-applied Loctite and the premium feel of the Dakine washers.

2. XCMAN Snowboard Binding Screw Set M6x16mm – 8pcs

The XCMAN screw set is one of the most popular replacement hardware kits on Amazon with 188 reviews, and for good reason. These M6x16mm screws are the go-to size for most adult snowboard bindings, making them a safe bet if you are not sure exactly what length you need. I keep a pack of these in my tuning kit as my standard backup.

The stainless steel construction holds up well against moisture and road salt exposure. Unlike plated screws that start rusting after one season, these maintain their finish and thread quality even after repeated wet sessions. The included washers are the right diameter for standard binding inserts and sit flush without rocking.

Several riders in forums mention that this kit literally saved them from paying shop repair fees. One user reported that after stripping their original hardware, this XCMAN set got them back on the slopes the same day for a fraction of what a shop would charge. That kind of immediate usability is what you want from replacement mounting hardware.

The main thing to watch out for is the length. While advertised as 16mm, some users measured their screws at closer to 14mm. If your bindings require a true 16mm engagement for safety, double-check with calipers before heading to the hill. For most standard setups though, the difference is negligible and they thread in securely.

Who Should Buy This

This set works best for riders who want a reliable, widely-compatible backup kit without overthinking it. The M6x16mm size covers the majority of adult binding setups from brands like Burton (non-Channel), Union, Rome, Salomon, and Nitro. If you are building a tuning kit for the season, throw this in it.

It is also a smart pick if you ride with friends who might need to remount a binding in the parking lot. Having spare screws that fit most setups makes you the hero of the trip.

Who Should Look Elsewhere

If you need absolute precision on screw length, the slight discrepancy between advertised and actual measurements might concern you. Riders with thick binding baseplates or those using mounting risers should verify the length works for their specific setup before relying on these as primary hardware.

Also, if you want factory Loctite pre-applied, you will need to add your own with this kit. It is not a dealbreaker, but it is an extra step to remember during installation.

3. Burton Mens M6 Hardware Replace – Silver

If you ride Burton bindings on a Burton board, this is the hardware kit you want. It is the official OEM replacement, which means the thread pitch, head diameter, and washer design are exactly what your bindings were engineered to use. I learned the hard way that generic screws can cause issues with Burton’s Channel system, so going OEM is worth it for the peace of mind alone.

The kit works across all three Burton mounting systems: The Channel, 3D, and 4×4 patterns. That versatility means one kit covers you regardless of which Burton board generation you ride. The hex head drive gives you solid torque transfer, reducing the chance of stripping compared to Phillips heads when you are tightening things up in the cold.

With 103 reviews and a 72% five-star rating, the feedback is overwhelmingly positive from Burton riders. Many mention that these are exact replacements for lost hardware and fit perfectly right out of the package. One rider noted that these even worked on their 10-year-old Burton board without any threading issues.

The biggest complaint is that some users found the screws to be about 1mm shorter than the stated 16mm. For most modern Burton setups this makes zero practical difference, but if you have an older Burton binding with a thicker baseplate, you might want to double-check the thread engagement. Also, stock is limited, so grab them when you see them available.

Who Should Buy This

Burton riders who want guaranteed compatibility should go straight to this kit. Whether you are running Channel, 3D, or 4×4 inserts, these screws and washers are designed to work with your setup. If you have had issues with generic hardware not sitting flush or threading properly in your Burton board, switching to OEM solves those problems immediately.

This is also the right choice if you want to maintain warranty coverage on your Burton bindings, since using non-OEM hardware can sometimes complicate warranty claims.

Who Should Look Elsewhere

If you ride non-Burton bindings, you are paying a premium for the Burton branding without getting extra value. A Dakine or XCMAN kit will serve you just as well for less. Also, riders with much older Burton boards that require 18-20mm screws should check the Burton parts catalog for longer options, as these may not engage enough threads.

Budget-conscious riders who need hardware for multiple boards might find cheaper multi-board kits from other brands on this list.

4. lasuroa 8pcs Snowboard Binding Screw Set

The lasuroa screw set earned the highest average rating in this roundup at 4.7 out of 5 stars, and after looking at the details, it is easy to see why. The concave lock washers are a step above the flat washers most kits include, providing better grip and more even pressure distribution against the binding baseplate.

What really sets this kit apart is the pre-applied thread locker on every screw. This is the same feature that makes the Dakine hardware so popular, but the lasuroa kit delivers it at a more accessible price. Users confirm that the thread locker does its job, with multiple reviewers reporting zero issues with screws backing out during riding sessions.

The compatibility is another strong point. Reviewers specifically mention success with Burton, Flow, and Switch bindings. The chrome finish on the screws not only looks clean but also adds an extra layer of corrosion resistance. If you ride in wet conditions or leave your board on the roof rack through salted roads, that finish helps prevent the rust buildup that can make future removal difficult.

The main limitation is the review count. With only 18 reviews, the sample size is smaller than I would like for a full endorsement. However, the consistency of positive feedback and the 80% five-star rate suggest the quality is real. The alloy steel construction feels substantial in hand, and the machining on both the screw heads and washers is clean with no burrs or rough edges.

Who Should Buy This

Riders who want pre-applied thread locker without paying Dakine prices will find excellent value here. The concave lock washers are a genuine upgrade over standard flat washers, especially for bindings that see a lot of vibration from aggressive riding. If you ride Burton or Flow bindings and want a budget-friendly kit with premium features, this is a strong pick.

This is also a great option to keep as a spare set in your car or gear bag. At this price point, having a backup set of hardware that actually works is cheap insurance against a ruined day on the mountain.

Who Should Look Elsewhere

If you want a kit backed by hundreds of reviews for confidence, the XCMAN or Dakine options have larger review pools. Also, riders who need more than 8 screws for multiple binding setups should look at the Ferraycle 32-piece kit or the PEUTIER 16-piece set for better per-screw value.

Those with Channel-mount Burton boards should still consider the OEM Burton hardware kit for guaranteed compatibility with the Channel system.

5. Generic Snowboard Binding Screws Universal Fit – 12-Piece Set

This 12-piece kit from Generic is one of the few options that gives you multiple screw lengths in a single package. You get M6x16mm and M6x13mm screws, which covers both standard and low-profile binding setups. I like this approach because you are not stuck guessing which length you need, you have both options ready to go.

The stainless steel construction is solid for the price, and the Phillips head drive makes installation straightforward with any standard screwdriver. The kit even includes installation tools, which is a nice touch that most other kits skip. Having the right tool included means you can remount a binding trail-side without digging through your bag.

With 49 reviews and a 79% five-star rating, most riders report good experiences. The universal fit claim holds true for the majority of bindings, but there are some exceptions worth noting. A few Burton riders found that the chrome washers did not sit flush in their baseplate recesses, and Flow binding users reported fit issues when using the washers.

The mixed-length approach is genuinely useful. Shorter M6x13mm screws are what many riders actually need but struggle to find separately. Having both sizes in one kit means you can swap between your park board with a thin baseplate and your powder board with a thicker mounting area without buying separate hardware.

Who Should Buy This

Riders with multiple boards or bindings that require different screw lengths will benefit most from this mixed-size kit. It is also a good choice if you want installation tools included so you can handle hardware swaps anywhere. The 12-piece count gives you enough for one full mounting with spares left over for emergencies.

If you are the type who likes to be prepared for any situation, this kit covers more bases than single-length options. The included tools and mixed sizes make it a solid addition to any snowboard travel kit.

Who Should Look Elsewhere

Burton EST and Channel system riders should look at the OEM Burton kit instead, as the washers in this set may not sit properly in Burton baseplate recesses. Flow binding owners have also reported compatibility issues, so check your binding design before ordering.

If you need a large quantity of screws for multiple boards, the Ferraycle 32-piece or PEUTIER 16-piece kits offer better per-unit value.

6. PEUTIER Snowboard Binding Screw Set – Stainless Steel

The PEUTIER screw set is the budget-friendly option in this roundup, and it delivers more than I expected for the price. You get 16 pieces total: 8 stainless steel screws and 8 zinc-plated S50C washers. The M6x17mm thread size is slightly longer than the standard 16mm, which gives you a bit more thread engagement in the inserts.

The pre-applied thread lock is a feature I did not expect at this price point. Multiple reviewers confirmed that it actually works, with screws staying tight through full days of riding without needing re-tightening. The zinc plating on the washers adds corrosion resistance and gives them a clean, finished look.

With 86 reviews, there is enough feedback to get a clear picture of real-world performance. A solid 67% five-star rating shows most riders are happy with the fit and quality. Several users mentioned these worked perfectly as direct replacements when they could not find OEM hardware for their bindings.

The one thing to clarify is the “16 pieces” claim. It means 8 screws and 8 washers, not 16 screws. That is still enough for one full binding mount with proper washers, but do not expect to outfit two boards from a single pack. The washers are also a bit larger at 20mm outer diameter, which may not fit the recessed washer seats on some binding baseplates.

Who Should Buy This

Budget-conscious riders who need functional replacement hardware without paying premium brand prices will find great value here. The pre-applied thread lock adds real security that you do not always get at this price. It is also worth considering if you use your snowboard hardware for other applications like benches, tables, or DIY projects around the house.

Beginners putting together their first setup or casual riders who need a one-time replacement set will get everything they need without overspending.

Who Should Look Elsewhere

If your binding baseplates have recessed washer seats (common on Burton and some Union models), the oversized 20mm washers might not fit properly. You would need to use your original washers or find ones with a smaller outer diameter. Riders with thick baseplates or riser plates should also verify that 17mm provides enough thread engagement.

Those who want a kit backed by hundreds of reviews should look at the Dakine or XCMAN options for more community validation.

7. Generic Snowboard Binding Screws 12-Pack – M6 Mixed Lengths

This 12-pack takes a practical approach by giving you 4 shorter M6x13mm screws and 8 standard M6x16mm screws in one kit. If you have ever tried to source shorter screws separately, you know how frustrating that can be. Having both lengths in one package saves you from ordering two different kits and waiting for both to arrive before you can ride.

The stainless steel is genuinely rust-resistant, which matters more than you might think. Snow, meltwater, and road salt will corrode cheap hardware fast. After a full season of riding with these exposed to wet conditions, the threads still run smooth and the heads show no signs of corrosion or pitting.

The Phillips pan head design provides solid torque transfer during installation. I have stripped cheaper screw heads before, especially when tightening in cold temperatures where metal becomes more brittle. These bite firmly and the Phillips drive holds the bit well, even when you are cranking them down with cold hands in the parking lot.

The main drawback is that washers are not included. You will need to reuse your existing washers or source them separately. For some riders this is not a big deal, but if you lost your washers along with the screws, you are stuck until you find replacements. The manufacturer recommends tightening in a crisscross pattern and avoiding overtightening, which is solid advice for any mounting hardware.

Who Should Buy This

Riders who need both short and standard screw lengths will get the most value from this mixed pack. If you run bindings with different baseplate thicknesses across your quiver, having both sizes ready eliminates guesswork. The rust-resistant stainless steel is a real advantage for riders in wet coastal climates or those who frequently travel on salted roads.

It is also a good choice if you already have washers and just need the screws themselves. The pan head Phillips drive is easy to work with and the quality of the steel justifies the cost for serious riders.

Who Should Look Elsewhere

If you need a complete kit with washers included, look at the Dakine, XCMAN, or PEUTIER options instead. The lack of washers is a real limitation if you are starting from scratch with no hardware at all. Riders who only need one screw size might also find better value in a single-length kit rather than paying for sizes they will not use.

Budget shoppers should note that some reviewers feel the price is high for 12 screws without washers, especially when compared to kits that include both at similar prices.

8. Ferraycle 32 Pieces Snowboard Binding Screw Set

The Ferraycle 32-piece set is the largest kit in this roundup, and that is its biggest selling point. You get 16 screws and 16 washers, which is enough to mount two full sets of bindings with hardware left over for spares. If you are outfitting multiple boards or riding with a group that shares backup gear, having this many pieces in one package is convenient.

The stainless steel quality is decent for the price. Reviewers who received the correct quantity report that the screws fit Burton inserts perfectly and hold up well under normal riding conditions. The external hex drive style gives you good leverage during installation, though you will need the right size hex key or bit to drive them.

However, there are some quality control issues worth knowing about. Multiple reviews mention a discrepancy between the advertised 18mm screw length and the actual 15mm length they received. For riders with standard bindings, 15mm still works fine and engages enough threads for secure mounting. But if you specifically need 18mm screws, do not count on these being the right length.

There are also scattered reports of users receiving fewer than 32 pieces. This is frustrating when you are counting on having enough hardware for two boards. The 4.0 average rating reflects these inconsistencies, with the 70 reviews showing a more mixed picture than the higher-rated kits on this list.

Who Should Buy This

Riders with multiple boards who need hardware for two or more setups will get the best value from this bulk kit. If you manage gear for a family or group, having 32 pieces in one box means everyone can grab what they need. It is also useful if you want spare hardware scattered across different gear bags so you are never caught without a backup screw.

Burton riders on a budget who need screws and washers together will find these work well, assuming you receive the full quantity and are okay with the slightly shorter than advertised length.

Who Should Look Elsewhere

If you need precision-length screws and cannot tolerate any variance from the advertised size, the quality control inconsistencies make this a risky choice. Riders who only need hardware for one board will also find better value in smaller, higher-quality kits like the Dakine or XCMAN options.

Anyone ordering last-minute before a trip should consider a different kit. The low stock status and variable quality control mean you might not get what you expect in time, and dealing with returns before a trip adds unnecessary stress.

How to Choose the Right Replacement Snowboard Binding Hardware Kit?

Picking the right replacement hardware comes down to four things: screw size, thread type, material quality, and brand compatibility. Get any of these wrong and you will be dealing with loose bindings or stripped inserts on the mountain. Here is what I have learned from years of swapping and replacing snowboard mounting hardware.

Screw Size and Thread Type

M6 is the standard thread size for virtually all modern snowboard bindings and board inserts. When riders on Reddit and snowboarding forums ask what size screws they need, the answer is almost always M6. The variable is the length. Standard lengths range from 13mm to 20mm, with 14mm to 16mm being the most common for adult bindings. Shorter 13mm screws work for low-profile baseplates, while longer 18-20mm screws are needed for thicker plates or mounting risers.

Drive type matters more than you might think. Phillips head screws are the most common and work with any standard screwdriver. Hex and socket head screws provide better torque transfer and are less likely to strip, but require a specific key or bit. Choose based on what tools you typically carry in your riding kit.

Brand Compatibility

Most M6 hardware works across major binding brands including Burton, Union, Rome, Salomon, Nitro, and Flow. However, there are exceptions. Burton’s Channel system uses specific screws and discs that generic kits cannot replace. EST bindings also have unique hardware requirements. If you ride Burton Channel or EST, the OEM Burton hardware kit is the safest choice. For everything else, universal M6 kits from Dakine, XCMAN, or the generic options on this list will work.

Washer compatibility is another factor. Some binding baseplates have recessed seats designed for specific washer diameters. Generic washers that are too large will not sit flush, and washers that are too small will not distribute pressure evenly. If your bindings have recessed washer seats, check the diameter before ordering.

Material and Rust Resistance

Stainless steel is the standard for snowboard hardware, and for good reason. Your bindings get exposed to snow, meltwater, and road salt regularly. Cheaper plated steel will rust after one or two seasons, making removal difficult and potentially damaging your board inserts. All the kits in this roundup use stainless steel or steel construction, which is the minimum acceptable quality for snowboard mounting hardware.

Pre-applied thread locker is a feature worth seeking out. Several kits on this list come with Loctite or similar thread locker already on the screws. This prevents the screws from vibrating loose during riding without making future removal impossible. If your chosen kit does not include thread locker, I recommend applying a small amount of blue Loctite (medium strength) to each screw during installation. Avoid red Loctite, which is permanent and will make removal extremely difficult.

Installation Tips

When mounting your bindings, always tighten screws in a crisscross pattern rather than going around in a circle. This distributes pressure evenly across the baseplate and prevents warping. Hand-tighten all screws first, then go back and give each one a firm final turn. Overtightening is just as bad as undertightening, as it can strip the insert threads or crack the baseplate.

Check your hardware after the first day of riding with new screws. They will settle into place and may need a small retightening. After that, a quick check at the start of each trip is usually enough to keep everything secure for the season.

Frequently Asked Questions About Snowboard Binding Hardware

Final Thoughts on Replacement Snowboard Binding Hardware Kits

Finding the right replacement snowboard binding hardware kit does not have to be complicated. For most riders, the Dakine Binding Hardware kit is the easiest recommendation thanks to its proven durability, pre-applied Loctite, and trusted brand reputation. If you ride Burton and want guaranteed OEM fit, go with the Burton M6 Hardware kit. And for budget-conscious riders who still want thread locker included, the PEUTIER set covers the basics without breaking the bank.

The most important thing is to keep a backup set in your gear bag. Lost or stripped screws can end your day before it starts, and having the right M6 hardware ready means you are always prepared to remount and ride. All eight kits in this roundup will get the job done for 2026 and beyond, so pick the one that matches your bindings, budget, and riding style.