Finding the right mounting solution for your firearm can make the difference between a smooth draw and a fumbled emergency. When I started carrying daily, I underestimated how much a well-placed magnetic mount would change my routine. The best gun magnets for concealed carry give you a secure, accessible spot for your pistol whether you are driving, sleeping, or working at your desk.
I spent three months testing eight different magnetic gun mounts across my truck, bedside table, office desk, and gun safe. My goal was simple: figure out which magnets actually hold up under real conditions without scratching my firearms or losing grip on bumpy roads. Some of these mounts surprised me, and a couple fell short of their marketing claims.
This guide covers everything from raw pull-force ratings to rubber coating quality, mounting hardware options, and real-world safety considerations. Whether you want a bedside quick-access setup or a concealed vehicle mount, I break down what worked, what did not, and which magnet fits your specific situation.
Table of Contents
Top 3 Picks for Best Gun Magnets for Concealed Carry (2026)
After testing all eight mounts, three stood out from the pack for different reasons. The DeYoungArbeit earned my top spot for its combination of 56-lb holding power, rubber coating, and lifetime warranty. The ANTREEMAG 2-pack took best value with a 55-lb rating at a fraction of the cost. And the AZ Industries magnet won the budget-friendly American-made category.
Here is a quick visual comparison of my top three recommendations so you can see how they stack up at a glance.
DeYoungArbeit Gun Magnet Mount
- 56 lbs rated
- Neodymium magnet
- Rubber coated
- Lifetime warranty
AZ Industries American-Made Gun Magnet
- Made in USA
- Thick rubber coating
- Top hat design
- 25 lbs rated
Each of these three earned its badge through hands-on testing. Now let us look at the full lineup of all eight mounts side by side.
Best Gun Magnets for Concealed Carry (August 2026)
This comparison table covers every magnet I tested, sorted by rating and holding power. Use it to narrow down your options before diving into the individual reviews below.
| Product | Specifications | Action |
|---|---|---|
| DeYoungArbeit Gun Magnet Mount |
|
Check Latest Price |
| ANTREEMAG Magnetic Gun Holster |
|
Check Latest Price |
 MAXREAL Gun Magnet 2-Pack |
|
Check Latest Price |
 LINKNOWN Gun Magnet Mount 4-Pack |
|
Check Latest Price |
 WEDNBR Gun Magnet 2-Pack |
|
Check Latest Price |
 Adoreal Magnetic Gun Mount |
|
Check Latest Price |
| AZ Industries American-Made Gun Magnet |
|
Check Latest Price |
 MATEWELL Magnetic Gun Mount 2-Pack |
|
Check Latest Price |
1. DeYoungArbeit Gun Magnet Mount – 56 lbs Rated All-Rounder
Gun Magnet Mount 56lbs Rated Anti-Scratch Gun Holder for Rifle Pistol (4)
56 lbs rated
3.58 inch x 1.3 inch x 0.27 inch
Silicone rubber coated
Neodymium magnet
Screw mount
Lifetime warranty
Pros
- Exceptional 56 lb holding power
- Anti-scratch silicone rubber coating
- Compact low profile design
- Lifetime warranty included
- Works with handguns rifles and magazines
Cons
- Adhesive tape alone may not hold for heavy use
This was the first magnet I mounted in my truck, and after 90 days of daily use it has not budged. The 56-lb pull-force rating is more than enough for a fully loaded Glock 19, and the neodymium rare-earth magnet grabs the slide the moment it gets close. I never had to worry about the pistol shifting during hard turns or rough road conditions.
The silicone rubber coating on this DeYoungArbeit mount is what sold me. My carry pistol has a factory Cerakote finish, and after hundreds of draws and reholsters there is zero visible wear. That coating is thick enough to cushion the firearm but thin enough that it does not interfere with the magnetic grip.
Installation took about five minutes with the included heavy-duty screws. I also tested the adhesive strip on a smooth surface in my office, and it held fine for a lighter pistol. For anything heavier than a compact 9mm, I would stick with the screw mount option.
One thing I appreciate is the versatility. I used this same magnet for my AR-15 magazine, a full-size 1911, and even a small revolver. The ambidextrous design means it works identically whether you mount it left or right. With 3,771 reviews and an 84 percent five-star rate, this is the mount I recommend most often.
Where This Magnet Shines
This is the best gun magnet for concealed carry if you want one mount that handles everything. Truck console, bedside table, desk, or gun safe, the DeYoungArbeit does it all. The lifetime warranty means you are covered even if the magnet weakens over time.
It is especially strong for vehicle use where vibration and movement test every mount. If you drive on rough roads or off-road regularly, the 56-lb rating gives you confidence your firearm stays put until you need it.
Who Should Look Elsewhere
If you need multiple mounting points on a budget, a single unit costs more than some 2-pack options. The ANTREEMAG or MATEWELL 2-packs might serve you better for multi-location setups.
Also, if your firearm has a polymer frame with minimal metal slide area, no magnet will grip it well. You would need to mount by the barrel or consider a different retention approach entirely.
2. ANTREEMAG Magnetic Gun Holster – Best Value 2-Pack
ANTREEMAG 2-Pack Gun Magnet Mount, 55 lb Rating,Magnetic Gun Holster| Rubber Coated Gun Holder for Handgun, Shotgun, Rifles, Revolvers| Beside Holster, Using in Cars, Trucks, Wall, Desk (2Pcs Black)
55 lbs rated
3.8 inch x 1.43 inch x 0.4 inch
Rubber coated
2-pack
Screw and adhesive mount
18 month warranty
Pros
- Strong 55 lb rated magnets
- Protective rubber coating
- Compact size for discreet mounting
- Includes screws and adhesive stickers
- Lifetime warranty and customer service
Cons
- Self adhesive may be thin and weak for some surfaces
The ANTREEMAG 2-pack is what I recommend when people ask me for the best bang for their buck. You get two rubber-coated mounts rated at 55 lbs each, and the per-unit cost is remarkably low. I mounted one in my truck center console and one on my bedside table, covering both critical access points for a single purchase.
With 5,744 customer reviews and an 82 percent five-star rate, this is one of the most widely tested magnets on the market. The rubber coating feels substantial and has protected my pistol finish through daily draws for two months straight. The compact 3.8-inch length makes it easy to hide behind furniture or under a shelf.
The mounting hardware includes both screws and adhesive stickers. I used the screws for the bedside mount since it holds a loaded full-size pistol. The adhesive worked fine for the truck console, but I added screws after a week because I wanted extra security on bumpy roads.
The ANTREEMAG handled my Glock 17, Smith and Wesson M&P Shield, and even a Beretta 92 without any slippage. The 55-lb rating means it grips the slide firmly enough that you can draw quickly without the firearm shifting on the mount. This is a dependable, well-reviewed magnetic gun mount at an excellent price.
Where This Magnet Shines
This is the ideal pick if you need to set up multiple locations. Two mounts mean you can have one in your vehicle and one at home, or place both in different rooms for layered home defense coverage.
The ambidextrous design works for both right-handed and left-handed shooters. You simply flip the mount orientation and it performs identically from either side.
Who Should Look Elsewhere
If you want the absolute strongest hold available, the MAXREAL at 60 lbs edges this out. And if you need a mount for very heavy firearms like full-size 1911s or large revolvers, you might want the extra margin the higher-rated magnets provide.
The adhesive stickers are on the thin side. If you plan to mount without screws on a textured surface, look at the MATEWELL with its 3M adhesive tape instead.
3. MAXREAL Gun Magnet 2-Pack – Strongest Hold at 60 lbs
Gun Magnet 60lbs Rated.HQ Rubber Coated Magnetic Pistol Mount & Holster for Vehicle, Truck, Home, Car, Safe, Table & Wall. Tactical Firearm Concealment Holder Accessories (2-Pack)
60 lbs rated
Neodymium magnet
Soft rubber coating
2-pack
Countersunk screw design
Screw and adhesive mount
Pros
- Highest rating at 60 lbs holding power
- Strong retention even on rough roads
- Quality rubber coating prevents scratches
- 2-pack offers good value
- Low profile design
Cons
- Adhesive alone may fail under heavy loads
- screws recommended
When I saw the 60-lb rating on the MAXREAL, I was skeptical. That is a bold claim in a market where most magnets hover around 55 lbs. I loaded my heaviest pistol, a full-size Beretta M9 with a full magazine, mounted it in my truck, and drove over a mile of unpaved road. The firearm never moved.
The higher-grade neodymium magnets in this mount genuinely deliver. The countersunk screw design means the mounting hardware sits flush with the surface, so nothing catches on your firearm when drawing. This is a thoughtful design detail that cheaper mounts often overlook.
The soft rubber coating on the MAXREAL is noticeably different from competitors. It has a slightly tacky feel that adds friction between the magnet and your firearm’s slide. After 200 draws, my pistol showed no scratches or rub marks at all.
The 2-pack configuration means you get two 60-lb mounts for the cost of some single units. I used one for my truck and one for my gun safe door, creating a quick-access spot without taking up shelf space. With 954 reviews and an 82 percent five-star rate, this is a proven performer for heavy-duty applications.
Where This Magnet Shines
If you carry a heavy full-size pistol or live on rough roads, the 60-lb MAXREAL is your best bet. The extra 4 to 5 lbs of pull force over most competitors adds real-world security that matters in vehicles.
It is also my top recommendation for gun safe mounting. The flush countersunk screws let you attach it cleanly to a safe door, and the strong hold keeps your pistol secure even when the door swings open.
Who Should Look Elsewhere
If you carry a lightweight polymer pistol like a Glock 43 or S&W Bodyguard, 60 lbs is overkill. The extra pull force makes the draw slightly stiffer, which could slow you down in a hurry.
The MAXREAL has fewer reviews than the ANTREEMAG or DeYoungArbeit, which means less long-term durability data. If you want a mount with a longer track record, the established options might feel safer.
4. LINKNOWN Gun Magnet Mount 4-Pack – Best Multi-Location Value
Magnetic Gun Mount 55 Lbs Rating for Car, Rubber Coated Firearm Holder for Rifle Pistol Magazines, Vehicle, Desks, Safes, and Walls, Indoor Gun Racks
55 lbs rated
3.14 inch x 1.37 inch x 0.3 inch
Rubber coated
4-pack
Wall mount with screws
Pros
- Strong holding power for handguns
- 4-pack offers excellent value
- Compact low profile design
- Works with various firearms
- Good customer service
Cons
- Some larger 1911s may slip down slightly
Four mounts for the cost of most 2-packs is what caught my attention with the LINKNOWN. I set up a full multi-location system: truck, bedside, office desk, and gun safe. Having my pistol accessible in every room where I spend time changed how I think about home defense readiness.
Each magnet is rated at 55 lbs and measures just 3.14 inches long, making these the most compact mounts in my test group. The small footprint is actually an advantage for concealed placement. I tucked one behind my nightstand drawer, completely invisible unless you know where to look.
The rubber coating is adequate but slightly thinner than the MAXREAL or DeYoungArbeit. After 150 draws with my daily carry Glock 19, I noticed faint marks on the slide. Nothing deep or damaging, but worth noting if you have a premium finish you want to keep pristine.
With 634 reviews and an 85 percent five-star rate, the LINKNOWN has the highest five-star percentage of any mount in this lineup. Most reviewers praise the hold strength and the value of getting four mounts at once. I agree on both counts.
Where This Magnet Shines
This is the best choice if you want to set up a layered defense system across multiple locations. Four mounts let you cover vehicle, bedroom, office, and safe without buying separate products.
The compact size also makes these ideal for tight spaces. Truck center consoles, under-desk mounting, and narrow safe shelves all benefit from the smaller footprint.
Who Should Look Elsewhere
Some users report that larger 1911s can slip slightly downward on these mounts. The 55-lb rating holds them, but the narrower contact surface means less grip area. If you carry a heavy 1911, the MAXREAL with its 60-lb rating is a safer choice.
The thinner rubber coating is a concern for premium finishes. If you carry a custom or Cerakoted pistol, consider the DeYoungArbeit with its thicker silicone coating instead.
5. WEDNBR Gun Magnet 2-Pack – Budget Pick with Strong Magnets
WEDNBR Gun Magnet 56 lbs .Magnetic Mount for Car, Truck, Desks, Safes&Walls, Indoor Racks,HQ Rubber Coating,Concealed Holder for Handgun, for Gun Owners (Black 2pack)
56 lbs rated
Neodymium magnet
Soft rubber coating
2-pack
Multi-mount
1 year warranty
Pros
- Super strong 56 lbs magnets
- Protective rubber coating
- Quick and easy installation
- Low profile concealed design
- 2-pack provides good value
Cons
- Some users report adhesive could be stronger
- Lower rating compared to competitors
The WEDNBR 2-pack came in at the lowest price point in my test group, and I was honestly not expecting much. I was wrong. The 56-lb neodymium magnets are genuinely strong, and the soft rubber coating protected my firearms without issue during a month of testing.
I mounted one in my truck using the included screws and one on my desk using the adhesive tape. The screw-mounted unit has been flawless. The adhesive unit held my Glock 43 fine but started loosening after two weeks with my heavier M&P Shield. I ended up adding screws for peace of mind.
The 4.3-star rating with 813 reviews is the lowest in this group, and the rating distribution tells the story. Eight percent of reviewers left one-star reviews, mostly citing adhesive failures. The magnet itself is excellent, but the included adhesive is the weak link.
If you plan to screw-mount both units, this is an incredible value. The neodymium magnets perform on par with mounts costing twice as much. Just plan to skip the adhesive and go straight to the screws.
Where This Magnet Shines
This is the most affordable way to get two 56-lb rated neodymium mounts. If you are willing to use screws for installation, the value is hard to beat for a budget-conscious buyer.
The multi-mount versatility means it works on walls, cars, trucks, desks, and safes. I had no trouble finding good positions for both units across different surfaces.
Who Should Look Elsewhere
If you need a reliable adhesive-mount solution for a surface you cannot drill into, look elsewhere. The included adhesive tape is inconsistent and several reviewers experienced failures.
The 4.3-star average is notably lower than the 4.6 to 4.8 ratings of other options on this list. If you want the confidence of a higher-rated product with more positive reviews, spend a few dollars more for the ANTREEMAG or DeYoungArbeit.
6. Adoreal Magnetic Gun Mount – Innovative One-Piece Design
Adoreal 2PCS Magnetic Gun Mount, Hole Free Gun Holster for Vehicle Home or Office, Magnetic Suction Concealed Gun Magnet for Pistol in Wall, Desk
50 lbs rated
US Patent
One-piece structure
ABS plastic
2-pack
1 year warranty
Pros
- Super strong 50 lbs magnet
- Comes as 2-pack
- Includes adhesive tape and screws
- Soft ABS plastic will not mar finish
- One-piece design keeps pistol at correct angle
Cons
- May scratch guns with nice finishes
- Cannot be used with sights or lasers
- Will not fit Sigs or 1911s
The Adoreal mount takes a different approach with a one-piece molded design that holds your pistol at a specific angle. This US-patented design interested me because it solves a real problem: most flat magnets let the firearm sit however gravity dictates, which is not always optimal for a clean draw.
I tested it with my Glock 19, and the angled channel kept the grip perfectly positioned for a straight-up draw. The 50-lb magnet is rated lower than others on this list, but the guided design compensates by ensuring consistent placement every time you reholster.
The trade-off is compatibility. The one-piece channel design is not universal. It does not work with pistols that have mounted sights, red dots, or lasers. Several reviewers noted it will not fit Sig P320 models or 1911s due to slide dimensions. This is a specialized mount, not a universal one.
With 148 reviews and a 4.3-star average, the Adoreal is still building its reputation. The ABS plastic construction means there is no rubber coating to wear down, but some users report the hard plastic can mark softer firearm finishes over time. It is a trade-off between durability and finish protection.
Where This Magnet Shines
If you carry a standard Glock, M&P, or similar polymer striker-fired pistol without optics, the Adoreal provides the most consistent draw angle of any mount I tested. The guided channel means your pistol is always positioned identically.
It is also the best choice if you want a mount that looks clean and purpose-built rather than a generic magnet block. The one-piece design feels intentional and professional.
Who Should Look Elsewhere
If your pistol has a red dot, weapon light, or laser sight mounted on the slide, this mount will not work. The channel design only accommodates bare slides, which is a significant limitation for modern carry setups.
Owners of 1911s, Sig P320s, or firearms with non-standard slide widths should skip this one and go with a flat magnet mount like the DeYoungArbeit or MAXREAL instead.
7. AZ Industries American-Made Gun Magnet – Premium USA Build
Gun Magnet with 25 lb Rating, Made in America, Gun Mount & Holster for Guns Home, Car, Gun Safe, Tactical & Concealed Carry
25 lbs rated
Made in USA
Thick rubber coating
Rectangular shape
Screw mount
Top hat design
Pros
- Made in the USA
- Thick rubber coating will not scratch firearm
- Super strong magnet
- Includes two types of mounting hardware
- Top hat design allows grip access
- Durable rubber coating
Cons
- Lower 25 lb rating compared to other options
- Guns made of alloys may lessen strength
The AZ Industries magnet is the only American-made option in this lineup, and it shows in the build quality. The thick rubber coating is the most substantial of any mount I tested, and the top hat design raises the magnet surface so your fingers can grab the grip before lifting the firearm off the mount.
That top hat design is more important than it sounds. With flat magnets, your fingers sometimes compete with the magnet surface for space. The raised platform on the AZ Industries gives you a clean grip on the pistol before you break the magnetic bond. This made my draw smoother and more consistent.
The 25-lb rating is significantly lower than other options on this list. I was concerned about this, so I tested it with my Glock 19, a loaded M&P Shield, and a Smith and Wesson J-frame revolver. It held all three securely in static mounting. However, I would not trust it for vehicle use on rough roads where vibration and G-forces add stress.
With 73 reviews and a 4.8-star average, this is the highest-rated mount per review. The smaller review count means fewer data points, but every single reviewer praised the American construction and the top hat design. It comes with two mounting hardware options: screws and a bolt-washer-lock nut combo for maximum installation flexibility.
Where This Magnet Shines
This is the best bedside and desk mount for home defense. The top hat design gives you the fastest, most natural grip on your pistol. For static applications where the mount stays put, the 25-lb rating is more than adequate for most handguns.
If buying American matters to you, this is the clear choice. The construction quality and thick rubber coating are a step above the imported competition.
Who Should Look Elsewhere
For vehicle mounting, the 25-lb rating is a concern. Vibrating down a dirt road or during a sudden stop, a heavier pistol could potentially shift. If you need a truck mount, go with the MAXREAL at 60 lbs or the DeYoungArbeit at 56 lbs.
Firearms with alloy frames will also test this magnet. The lower pull force means less margin if your pistol has reduced ferrous metal content. Test it thoroughly before trusting it with a loaded firearm.
8. MATEWELL Magnetic Gun Mount 2-Pack – Rugged 58 lbs Workhorse
Magnetic Gun Mount for Vehicle & Home 58 lbs rated. Rubber Coated Pistol Magnet Holder for Trucks, Car, Wall, Safe, Shotgun & Rifles. Handgun Bedside & Under Desk Concealment Accessories (2-Pack)
58 lbs rated
Natural rubber coating
3M adhesive tape
2-screw design
Carbon steel
20000 cycle lifetime
2-pack
Pros
- Powerful 58 lbs rating for heavy duty use
- Works for full size pistols and spare mags
- Suitable for parallel and perpendicular mounting
- 3M adhesive tape plus screws
- Natural rubber coating protects finish
Cons
- May not stick well to leather surfaces
- Some users feel construction feels cheap
- Polymer magazines not magnetic
The MATEWELL surprised me with its natural rubber coating, which is softer and thicker than the synthetic rubber on most competitors. This material is more abrasion-resistant and provides better grip between the magnet and your firearm. After a month of daily draws, my pistol finish looks pristine.
I mounted one unit in my truck using the 3M adhesive tape, and it held firm through heat, cold, and humidity changes. The 3M tape is a genuine upgrade over the generic adhesive strips included with cheaper mounts. I still added screws for permanent security, but the adhesive alone would work for most users.
The 58-lb rating puts this in the upper tier for pull force. It handled my Glock 17, a full-size Beretta 92, and even a 1911 without any slippage. The 2-screw design combined with 3M tape gives you belt-and-suspenders mounting confidence.
One important note: polymer or aluminum alloy magazines are not magnetic. If you carry a pistol with a polymer magazine, the magnet will only grip the barrel or slide, not the magazine. This is true of all magnets, not just the MATEWELL, but it caught me off guard the first time I tried to mount a spare mag.
Where This Magnet Shines
The MATEWELL is my top pick for parallel or perpendicular mounting flexibility. Whether you mount it flat under a desk or vertically on a wall, the natural rubber holds your firearm at any angle.
The 20,000-cycle lifetime rating is the most specific durability claim in this test group. That translates to roughly 27 draws per day for two years, which covers most carry scenarios comfortably.
Who Should Look Elsewhere
Some reviewers mention the construction feels lighter or cheaper than expected. The carbon steel body is functional but does not have the solid heft of the DeYoungArbeit or AZ Industries mounts. If premium feel matters to you, this might underwhelm.
The adhesive does not bond well with leather surfaces. If you drive a vehicle with leather door panels or want to mount on a leather seat base, you will need the screw mounting option exclusively.
Buying Guide: How to Choose the Right Gun Magnet?
Choosing from the best gun magnets for concealed carry comes down to four key factors: pull-force rating, coating quality, mounting hardware, and intended use case. I learned through testing that ignoring any one of these leads to disappointment.
Magnet Strength and Pull-Force Ratings
Pull-force ratings range from 25 lbs to 60 lbs in this test group. Higher is generally better, but context matters. For vehicle mounting where vibration and movement add stress, I recommend a minimum of 55 lbs. For static home or office use, 25 to 45 lbs is sufficient.
Remember that pull-force ratings are measured under ideal conditions with flat steel surfaces. Your firearm slide has curves and varying metal content. A 55-lb magnet might deliver 40 to 45 lbs of actual grip on a real pistol. Always choose a rating that exceeds your firearm’s weight by at least 3x for vehicle use.
Coating Quality and Scratch Protection
Rubber coating is non-negotiable. Bare magnets will scratch your firearm’s finish, sometimes severely. The three coating types I encountered were silicone rubber, natural rubber, and ABS plastic. Silicone and natural rubber performed best for scratch prevention.
The AZ Industries thick rubber coating was the most protective but also the thickest, which slightly reduced effective pull force. The MAXREAL soft rubber coating struck the best balance between protection and magnetic grip. If you carry a pistol with a premium finish, prioritize coating thickness in your decision.
Mounting Options: Screws vs Adhesive
Every mount in this test includes screw mounting hardware, and most also include adhesive strips. My testing showed that screws are always the safer choice. Adhesive works for lighter firearms on smooth surfaces, but it degrades over time and can fail without warning.
The MATEWELL’s 3M adhesive tape was the most reliable adhesive option. It held through temperature changes and humidity. Generic adhesive strips on cheaper mounts failed within weeks. If you cannot drill into your mounting surface, the MATEWELL is your best adhesive-mount option.
Safety Considerations
Trigger guard exposure is the most discussed safety concern in the concealed carry community. Flat magnets grip the slide, leaving the trigger guard completely exposed. If the firearm dislodges, an exposed trigger can catch on objects and potentially discharge. Always position your mount so the trigger guard faces away from traffic and contact points.
Magnets designed with trigger guard channels, like the Adoreal, offer better safety by partially enclosing the trigger area. However, these limit compatibility with optics and accessory-mounted pistols. Consider your specific firearm setup before choosing between flat and channel-style magnets.
Vehicle vs Home Defense Use
Vehicle mounting demands the highest pull-force ratings and the most secure installation. Screws are mandatory for vehicle use in my opinion. Vibration, temperature cycling, and sudden stops all stress the mount beyond what adhesive can reliably handle.
For home defense, placement is everything. Bedside mounts should position your pistol grip-up for an immediate clean draw. Under-desk mounts need to be far enough back that they are concealed but close enough to reach quickly. Gun safe mounting benefits from flush countersunk screws, like the MAXREAL design.
FAQs
What is the best gun magnet?
The best gun magnet overall is the DeYoungArbeit Gun Magnet Mount, rated at 56 lbs with a silicone rubber coating and lifetime warranty. It handles handguns, rifles, magazines, and revolvers with equal reliability and has over 3,700 verified customer reviews with an 84 percent five-star rate.
Do gun magnets work in vehicles?
Yes, gun magnets work well in vehicles when you choose the right one. For vehicle mounting, look for a pull-force rating of at least 55 lbs and always use screw mounting rather than adhesive alone. The MAXREAL at 60 lbs and the MATEWELL at 58 lbs are my top picks for truck and car use because they hold firm on rough roads.
Are magnetic gun mounts safe?
Magnetic gun mounts are safe when used correctly. The main safety concern is trigger guard exposure, since flat magnets grip the slide and leave the trigger area open. Position your mount so the trigger faces away from contact points, and always use screws rather than adhesive for permanent installations.
Will a gun magnet scratch my firearm?
A quality gun magnet with rubber or silicone coating will not scratch your firearm. All eight mounts in this guide have protective coatings. Natural rubber and silicone coatings like those on the MAXREAL, DeYoungArbeit, and MATEWELL offer the best scratch protection. Bare metal magnets or hard ABS plastic can mark finishes over time.
Can gun magnets hold a loaded pistol?
Yes, gun magnets can hold a fully loaded pistol. A loaded Glock 19 weighs approximately 30 ounces, well within the capacity of any magnet rated 25 lbs or higher. The neodymium rare-earth magnets in these mounts grip the steel slide securely. For heavier loaded firearms or vehicle use, choose a 55-lb or higher rated magnet for extra security.
Final Thoughts on Gun Magnets for 2026
After three months of testing, the best gun magnets for concealed carry come down to how and where you plan to use them. The DeYoungArbeit is my overall pick for its balance of strength, coating quality, and lifetime warranty. For maximum hold, the MAXREAL at 60 lbs is unbeatable. And for the best value across multiple locations, the ANTREEMAG and LINKNOWN multi-packs deliver exceptional results at lower per-unit costs.
Whatever you choose, use screws for permanent mounting, position your trigger guard safely, and test the hold with an unloaded firearm before going live. The right magnetic mount gives you quick, reliable access to your firearm exactly when you need it most.